Quote:
|
Originally Posted by blue68f100
Did you try the 2000 hd in a 2200 to see if it works? I don't think anyone has tried. Remove the drives from the 2000 and install a new master. The main difference it some extra code is loaded for the 2000 that is not used in the 2200. If it boots you will need to reinstall the os.
|
Yes, I have done exactly this, removed both disks from 2000, installed a 40gb Quantum ATA drive and let it format. After that I've checked via webinterface (Disk status): only 9 Files on the harddisk. After that I've installed this disk into the 2200 - does not work! The power and hd-leds are flashing in sync, both leds blink once in sync, after that the hd led blinks second time, paused, both leds blink once in sync, .... and so on. The link-led is on, the lan-activity flashes sometimes... but gets no ip from dhcp. Waited half an hour, led still flashing in sync the same way. I've also put the 2000 hds into the 2200, same led flashing...
Have also done a "co de format 10000 /reinit" at the 2000 with the mentioned 40gb hd.
I've read in an other thread about a snap2200.rar or snap2200.bin ... But it seems, nobody have this file :-(
It seems, that I have now a new paperweight ...
