Pro/Forums - View Single Post - 4100

blue68f100 · 11-29-2006, 07:47 PM

The picture I have of the 4100 indicates that there is a eprom (2732?, photoeye covered (label)) by the ribbon connector leading to the display and IDE header not used. These run on 5 v and require a lot of power to program, not like the flashram. There apears to be 1 flashram located between drives 2 & 3 down about 2". The chip with the label by the power supply looks like a dip, (hw map?).

My programmer should be able to read all of these.

11-29-2006, 07:47 PM	#23
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: 4100 - LBA48 support The picture I have of the 4100 indicates that there is a eprom (2732?, photoeye covered (label)) by the ribbon connector leading to the display and IDE header not used. These run on 5 v and require a lot of power to program, not like the flashram. There apears to be 1 flashram located between drives 2 & 3 down about 2". The chip with the label by the power supply looks like a dip, (hw map?). My programmer should be able to read all of these. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820