Pro/Forums - View Single Post

MaddMatt · 12-18-2006, 06:19 AM

I have 2x Snaps from work, both have Motherboard problems;

The 1100 fires up the HDD but no LED's
The 2200 does nothing....

Before I write them off I just wanted to check if I should do anything in particular to either of them first?
E.g. before I pull them apart, will;
* Removing and replacing the bios battery;
* Delicate cleaning;
* Voodoo or the Black Arts;
* Getting Shane Warne to touch it (the Motherboad that is);
Anything that you can think of (that I may not have) help?

Alternativly; has anyone out there come across an aftermarket boad that fits and is inexpensive as a worthwhile replacement?

Any assistance is greatly appreciated!

12-18-2006, 06:19 AM	#1
MaddMatt Registered User Join Date: Dec 2006 Location: Houston, Texas Posts: 65	Snap Server 1100 & 2200 I have 2x Snaps from work, both have Motherboard problems; The 1100 fires up the HDD but no LED's The 2200 does nothing.... Before I write them off I just wanted to check if I should do anything in particular to either of them first? E.g. before I pull them apart, will; * Removing and replacing the bios battery; * Delicate cleaning; * Voodoo or the Black Arts; * Getting Shane Warne to touch it (the Motherboad that is); Anything that you can think of (that I may not have) help? Alternativly; has anyone out there come across an aftermarket boad that fits and is inexpensive as a worthwhile replacement? Any assistance is greatly appreciated!