View Single Post
Unread 01-04-2007, 07:59 AM   #7
Captain Slug
Cooling Savant
 
Captain Slug's Avatar
 
Join Date: Jan 2006
Location: VA
Posts: 129
Default Re: Buying the best watercooling system under $350...need suggestions/help???

Black Ice Pro III = $60
http://www.petrastechshop.com/hwlablicegts1.html

Laing DDC w/ Petra's DDCT-01 Top = $100
http://www.petrastechshop.com/laddcwpeddto.html

White Water = $35
http://www.petrastechshop.com/aqwhwaliedun.html

Maze 4 SLI (2 of them) = $45 x 2 = $90
http://www.petrastechshop.com/q.html

Yate-Loon 120mm fans (4 of them) = $20
http://www.petrastechshop.com/12yalod1cafa1.html

2 Packs of RAMsinks = $28
http://www.petrastechshop.com/evncorapof8.html

15 feet of 7/16" ID Masterkleer PVC = $4.90
http://www.petrastechshop.com/7id5odmagepu.html

1/2" Tee = $2
http://www.petrastechshop.com/1odtf1and7id.html

Whatever Additive you prefer = $5
http://www.petrastechshop.com/wacoac.html

Fillport = $12
http://www.petrastechshop.com/dadendefi.html

Total = $357 + shipping

To use 7/16" ID tubing on 1/2" barbs simply have a pot of really hot water near by and dip the ends of the tubing into it, then slide the end onto your barbs. You won't need to use clamps with it.
You will also need some #6-32 standoffs, spacers, and hex nuts to mount the 3x120mm radiator spaced off the top of your case. With the radiator mounted outside the case the only part you need to find space for inside is the pump.

Last edited by Captain Slug; 01-04-2007 at 08:09 AM.
Captain Slug is offline   Reply With Quote