Pro/Forums - View Single Post

cybrsamurai · 02-06-2002, 07:30 PM

Ok, I am looking for a radiator/Heater Core or two that will fit in between the cdrom drive and powersupply in a Lian Li PC60. The measurements I have come up with are very restrictive around 5"X5"Xwhatever. This is of course with a 120mm Hole in the top of the case. I can use multiple radiators and fans and im not too worried about my flow rate as I can put in an extra pump if need be. I will be cooling approx 200 watts of heat so I don't want to skimp on the radiator side o things. Any Suggestions would be much appreciated.

Jordan H.

P.S. If you know of one who would build a custom radiator for me that would be just as good.

02-06-2002, 07:30 PM	#1
cybrsamurai Cooling Savant Join Date: Jan 2002 Location: Ashland Posts: 296	Radiator Goodness! Ok, I am looking for a radiator/Heater Core or two that will fit in between the cdrom drive and powersupply in a Lian Li PC60. The measurements I have come up with are very restrictive around 5"X5"Xwhatever. This is of course with a 120mm Hole in the top of the case. I can use multiple radiators and fans and im not too worried about my flow rate as I can put in an extra pump if need be. I will be cooling approx 200 watts of heat so I don't want to skimp on the radiator side o things. Any Suggestions would be much appreciated. Jordan H. P.S. If you know of one who would build a custom radiator for me that would be just as good.