OK.. Here's what appears to be a new one.. At least I didn't find it in
http://wiki.procooling.com/index.php...r_LED_Patterns
http://wiki.procooling.com/index.php...e_LED_Patterns
or
http://wiki.procooling.com/index.php/Snap_Server_Resets
The sequence to initiate this mode seems to be ..
1. Unplug power from drive.
2. Press and hold power and reset.
3. Re-insert power cord and quickly release power button .
This leaves my V2 with the System and Disk LEDs alternately flashing at
about 2 Hz. (back and forth like a train crossing and about the same speed)
The Link LED is following the link status as I plug and unplug the cable.
and the Net LED is flashing when I probe with Snap Assist.
My question is this,
Did I find an undocumented mode or did I just confuse the hell out of it?
Bleeptech