Pro/Forums - View Single Post

HaxR3 · 01-23-2007, 08:53 AM

Revised Design shown in the quite hard to work with "2D Design Software"

Base size is now 65x65mm

The Middle Plate Is shown In 2 sections (Mill and Cut) because the mills can only really do one height at a time xD

Middle Fin is *rather* large but with the machines at school it is either there, or not. So I will be making a channel through the centre of it at home with my Dremel.

Extra detail will be added with my dremel too;to add turbulance and help combat laminar flow.

Each dot is 2.5mm away from its neighbour and is there for measuring purposes only.

At school now hence 800x600 and IE lol

Thanks for all the feedback.

01-23-2007, 08:53 AM	#3
HaxR3 Cooling Neophyte Join Date: Jan 2007 Location: England Posts: 6	Re: My Peltier Waterblock Revised Design shown in the quite hard to work with "2D Design Software" Base size is now 65x65mm The Middle Plate Is shown In 2 sections (Mill and Cut) because the mills can only really do one height at a time xD Middle Fin is rather large but with the machines at school it is either there, or not. So I will be making a channel through the centre of it at home with my Dremel. Extra detail will be added with my dremel too;to add turbulance and help combat laminar flow. Each dot is 2.5mm away from its neighbour and is there for measuring purposes only. At school now hence 800x600 and IE lol Thanks for all the feedback. __________________ A64 3700+ / DFI RDX200 CF / 6800GT / Asetek WC