Pro/Forums - View Single Post - Another dead 2200 -Help?

blue68f100 · 02-16-2007, 01:04 PM

IAJack, If the sys led is blinking rapidly, means it in panic mode. This happens if there is a HD failure, sometimes. Put the drives back in their original order, then reset it back to factory and see if the units boot.

The sys and disk led will flash a error sequence if it encouters a problem.

Report Back

02-16-2007, 01:04 PM	#3
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Another dead 2200 -Help? IAJack, If the sys led is blinking rapidly, means it in panic mode. This happens if there is a HD failure, sometimes. Put the drives back in their original order, then reset it back to factory and see if the units boot. The sys and disk led will flash a error sequence if it encouters a problem. Report Back __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820