Pro/Forums - View Single Post

Moto7451 · 02-26-2007, 03:47 PM

I think you should instead widen it and just make an additional fin and reorganize them so that the spacing works out right. I can see that you don't want any large gaps between fins but don't kill yourself. Having dremmeled copper before, let me tell you that it is time intensive. If a 5 minute tweak to the design is all you need to do to widen and shift the block then I say do that.

02-26-2007, 03:47 PM	#8
Moto7451 Cooling Neophyte Join Date: Jan 2005 Location: LA, CA Posts: 53	Re: My Peltier Waterblock I think you should instead widen it and just make an additional fin and reorganize them so that the spacing works out right. I can see that you don't want any large gaps between fins but don't kill yourself. Having dremmeled copper before, let me tell you that it is time intensive. If a 5 minute tweak to the design is all you need to do to widen and shift the block then I say do that. __________________ Athlon 64 3200+ Rev F @ 2.4Ghz (and climbing) @ 1.53v, DFI Infinity UltraII-M2, 512MB Apple Micron D9 DDR2 @ 400MHz (DDR2 800) 5-5-5-12 @ 2v, 128MB Radeon X800 @ 460/900, Dual 120GB HDs in RAID 0 Loop 1: D5 Pump • Bonneville w/ AC Heater Core • Swiftech MCW6002 • Gemini Tsunami VGA block • Gemini Tsunami S478 block (cold side chiller block) 110W 16v TEC @ 60W 12v Loop 2: PC Watercooling Shop 12v Water Pump • PCWCS 80.2 Rad • Gemini Tsunami (hot side chiller block)