Thread: Out of the Blue
View Single Post
Unread 03-07-2007, 07:47 AM   #2
blue68f100
Thermophile
 
blue68f100's Avatar
 
Join Date: Jul 2005
Location: Plano, TX
Posts: 3,135
Default Re: Out of the Blue

What you describe is a normal condition, unless the sys and disk are blinking in unison. You can confirm by looking at LED error codes in the wiki section. Try using Assist and see if it see the snap.

See if it will power down normaly, holding the buttom, then restart. If that fails do a reset to factory, you will need a copy of assist to locate and do the initial setup.
__________________
1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5,
1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5,
1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy

Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820
blue68f100 is offline   Reply With Quote