Hey David:
Thanks for verifying that stuff for me and the extra info as well. I'm on page 43 of the "Hack a Snap1000" so I haven't ran across it yet , but I'm sure I will. Don't know if you know this , but I de-soldered my bios chip and os chip from my Snap1000 board. Don't know if anybody has done that yet. Also, what TSOP should I get from Willem Eprom website? I have the (PCB3B/PCB3.5) version. I don't see anything that is a TSOP 44 that this chip will fit in by the look of the pictures on the website. The large chip has a total of 44 contacts with 11 contacts on each side. Also, is there a way to flash another Snap1000 bios with the bios file I have saved from the soldered bios without desoldering the bios chip on the mobo?
Thanks again in advance,
Sincerely,
bitor
Quote:
|
Originally Posted by blue68f100
All of this has been covered in the past, under the famous Hack a Snap1000 mega post and others. I have read the flashram in my 2000v1 at least the first 1/2, yes I have the tsop adapter (and blanks chips) for my programmer. Yes you are correct about the flashram. They are dual purpose, BIOS and OS. The 8+meg is for the 12000 models.
|