Ok, I was able to downgrade the OS on my 4000 to version 4.0.830.
However, the model and platformbytes are still wrong. The ethernet address is also wrong.
I can unlock the bios, change the settings for each of these and lock bios, but none of the configuration will stay. Any ideas?
info log t
Code:
3/20/2007 23:47:18 2 D SYS | HiRez: Platform bytes are Wrong! (0.0.0)!
03/20/2007 23:47:18 2 D SYS | e2: E2-Cache was defaulted!
03/20/2007 23:47:18 2 E NET | Ethernet driver : Checksum, signature or ethernet address is wrong. Defaulting E2-Image.
03/20/2007 23:47:18 2 W NET | Ethernet driver : Changing platform bytes from 0.0.0 (0) to 2.0.1 (0).
03/20/2007 23:47:18 2 W NET | Ethernet driver : Writing whole image.
03/20/2007 23:47:18 2 E NET | Ethernet driver : Checksum, signature or ethernet address is wrong. Defaulting E2-Image.
03/20/2007 23:47:18 2 D SYS | e2: E2-Cache was defaulted!
03/20/2007 23:47:18 2 E NET | Ethernet driver : Checksum, signature or ethernet address is wrong. Defaulting E2-Image.
03/20/2007 23:47:18 2 W NET | Ethernet driver : Changing model byte from 0x00 to 0x02.
03/20/2007 23:47:18 2 W NET | Ethernet driver : Changing platform bytes from 0.0.0 (0) to 0.0.0 (2).
03/20/2007 23:47:18 2 W NET | Ethernet driver : Writing whole image.
03/20/2007 23:47:18 2 E NET | Ethernet driver : Checksum, signature or ethernet address is wrong. Defaulting E2-Image.
03/20/2007 23:47:18 2 S SYS | System Initialization : Server v4.0.830
Build Date: Dec 24 2003 19:04:13
Boot Count: 2
03/20/2007 23:47:18 2 D SYS | Executable built by KEVIN
03/20/2007 23:47:18 2 D SYS | Hardware platform:0.0.0 Model:0 (64 MBytes) S/N:16999
03/20/2007 23:47:18 2 D SYS | ETH: Reset- Eaddr set to 00 C0 B6 00 42 67
03/20/2007 23:47:18 2 D SYS | Update IP...
03/20/2007 23:47:18 2 I NET | INIT: Setting IP address to 192.168.1.108
03/20/2007 23:47:18 2 D SYS | Update IP...
03/20/2007 23:47:18 2 D SYS | Initial file system BIO cache size is 6709632 bytes, 808 buffers
03/20/2007 23:47:18 2 D SYS | DISK: Initial ARBs: 808 Memory: 132512
03/20/2007 23:47:18 2 D SYS | Code Page set to 437
03/20/2007 23:47:18 2 D SYS | QDL System is ENABLED
03/20/2007 23:47:18 2 D SYS | Disk cache flush enabled
03/20/2007 23:47:19 2 D SYS | SNMP agent enabled for ReadWrite.
03/20/2007 23:47:19 2 D SYS | AFP: started
03/20/2007 23:47:19 2 D SYS | 'FTPD' started.
03/20/2007 23:47:19 2 D SYS | Update WorkGroup...
info ver
Code:
Product: 0 - "Minnie: 2 drive IDE" - Platform Bytes "0.0.0"
Server-4.0.830, Build Date: Dec 24 2003 19:04:13
This is the NON-Debug executable, and was built by KEVIN
You are logged in as user ROOT (local)
info cmos
Code:
Server Name: SNAP16999
Ethernet Address: 00-C0-B6-00-42-67
Serial No: 16999
Auto-Gen. IP Addresses: DISABLED
IP address: 192.168.1.108
IP netmask: 255.255.255.0
IP Default gateway: 192.168.1.1
DHCP Server Address: 192.168.1.1
WINS/NetBios Name Server:0.0.0.0
DNS Server: 68.12.16.30
SMTP Mail Server: 0.0.0.0
One interesting fact that I noticed is that after issuing the
config cmos serial-no
command, the name of the device changed to reflect the new serial number.
At this point, I am resigned to believe that the problem is not in the OS, but rather in the BIOS.