Quote:
|
Originally Posted by tfitzgerald
So, I've reset according to the HowTo, it gets a DHCP lease, I can get to the log in screen, but none of the passwords work!
I would love to get this machine back on the network (snap 4100)
|
Just to BE SURE;
1. Press and Hold the Reset button.
2. Turn on the Unit.
3. Both System and Disk LED should be flashing in unison.
4. Release the Reset button.
5. Press the Reset button 4 times.
6. The Disk LED should flash 4 times, then pause, then 4 times, pause, etc...
7. Press and Hold the Reset button.
8. When the System and Disk LED go off (and stay off), release the Reset button.
The snap will now reboot and has been reset back to factory configuration.
Use Assist to log into your SNAP Server. Assist is going to want to do an "initial setup" first. During this intitial setup, it will set the language support, the time date, server name, and administrator password. It IS case sensitive....
If you do not use Assist, you need to know the IP address it is assigned. It will ask you to choose language, then you can log on. The factory default for the username/password is "administrator" and the password is blank, not as in the word "blank", but as in void of any charachters.