Pro/Forums - View Single Post - logical set 60000, error -1

blue68f100 · 03-31-2007, 03:49 PM

The snap will take ~5-10 min before you will gain access to the admin.

Make sure the larger drive is not installed in position 1 or 2.

I have noticed on some units installing 1 drive at a time works.
You can also try adding the "/nocore" flag to the /init cmd.
Last but not least, use WD drive utility to read the size of your original HD then adjust the new drive to match.

03-31-2007, 03:49 PM	#40
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: logical set 60000, error -1 The snap will take ~5-10 min before you will gain access to the admin. Make sure the larger drive is not installed in position 1 or 2. I have noticed on some units installing 1 drive at a time works. You can also try adding the "/nocore" flag to the /init cmd. Last but not least, use WD drive utility to read the size of your original HD then adjust the new drive to match. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820