Pro/Forums - View Single Post - Problems with failure on a 2000 model in mirror mode

dunkz · 04-01-2007, 07:55 AM

Hey Blue,

Sorry for the long time between responses, I finally had time to sit down with this. When I disconnect all drives and try to boot same thing. THe lights are on but no one is home.

I noticed that the fan on the mainboard isn't spinning. That made me think either the board isn't getting power or the fan only goes on as needed. I looked at the connections and nothing was loose as far as I could tell.

04-01-2007, 07:55 AM	#12
dunkz Cooling Neophyte Join Date: Mar 2007 Location: NH, USA Posts: 9	Re: Problems with failure on a 2000 model in mirror mode Hey Blue, Sorry for the long time between responses, I finally had time to sit down with this. When I disconnect all drives and try to boot same thing. THe lights are on but no one is home. I noticed that the fan on the mainboard isn't spinning. That made me think either the board isn't getting power or the fan only goes on as needed. I looked at the connections and nothing was loose as far as I could tell.