Quote:
|
Originally Posted by blue68f100
Read the FAQ's on the 4100's will answer some of your question.
|
Wilco
Quote:
|
Originally Posted by blue68f100
The cpu fan is controlled by firmware. It only spins up when it gets HOT.
Boots from flashram.
Have not looked at the PS fan, so I can comment. But if you can open the case you can replace it.
The 4100 were shipped with 2 different ram cap 64m & 128meg. If you run JVM you need 128 for it to run smothly. PC100/133 low density Max cap 256meg.
|
I have 128Mb, so I won't worry further.
Quote:
|
Originally Posted by blue68f100
Unless you have source, and knowledge of BIOS code. Good luck. We if rulled this dead. It may be possiable to load Linux on a a 1100 or 2200 which use a std/modified bios, but have hardware markers/checks. It's beyond my knowledge.
|
Me too by the sounds of things.
Quote:
|
Originally Posted by blue68f100
If you want me to look at the FB1 & FB2 areas of your MB you may email them me. The resistor values they added were 10 ohms.
|
I can't get a large enough image without passing the minimum focal length of my camera (and it going blurry). Is this clear enough?
Quote:
|
Originally Posted by blue68f100
If you need more info, post snap vitals by clicking on the snapAppliance logo.
|
Clicking on the logo:
Model Software Hardware Server # BIOS
4000 series 4.0.860 (US) 2.2.1 569482 2.4.437
Thanks for the info
J