Pro/Forums - View Single Post

ibmkg · 07-28-2007, 11:27 AM

Osaka:

Whats the ambient temp (room temp and system temp)?

I am a rookie so I cannot say much than,

a) Is your pump getting 'any hot'? If the water flow rate is low, it should be hot.

b) If you have a digital thermometer, check out the rad temp, GPU Block temp. [Becareful not to short anything, make sure you and your PC is grounded and that you are static free]. Touch the thermal probe of thermometer to the exposed Cu area of the block and report back the temp under load and idle.

07-28-2007, 11:27 AM	#8
ibmkg Cooling Savant Join Date: Jan 2005 Location: USA Posts: 129	Re: Video card overheating problem Osaka: Whats the ambient temp (room temp and system temp)? I am a rookie so I cannot say much than, a) Is your pump getting 'any hot'? If the water flow rate is low, it should be hot. b) If you have a digital thermometer, check out the rad temp, GPU Block temp. [Becareful not to short anything, make sure you and your PC is grounded and that you are static free]. Touch the thermal probe of thermometer to the exposed Cu area of the block and report back the temp under load and idle. __________________ NOTE: Suggestions are based on my perceptive. I could be erroneous. Therefore, no one has the right to criticize an individual other than rephrasing and or expressing his own annotations on the subject matter itself.