[fisherscpa]

I had a hard drive fail. After replacing the drive (as I have found the instructions in several places here- thank you very much) the system will recognize the drive but have to do some sort of drive check everytime it boots. Additionally, if left on for several hours the unit's just starts to rapidly flash and I have to reboot.

Snap Server Window Reads...
Model- 2000 series
Software- 4.0.855 (US)
Hardware- 2.0.3
Server #- 801089
Bios- 3.4.758

The server log reads...

S
System Initialization : Server v4.0.855
Build Date: Sep 24 2004 20:13:34
Boot Count: 14
System 8/1/2007 11:48:15 AM
F
Call Stack :
$0024B451
$00246004
$002440D6
$00243FA6
$0023C65B
$002399FF
$001041C3
================================
System 8/1/2007 11:36:44 AM
F PANIC : ASSERT(fcbp->fcb_magic == FCB_MAGIC) System 8/1/2007 11:36:44 AM

I have tried using Digital Dolly to reload the BIN file and the process is just repeated.

Alright you great brains out there, help me out. I have spent so much time on this now- it's just the principle of the thing at this point.

I have another unit (2000) that runs just fine without any issues at all. Would installing 1 of the drives from the 2200 and formatting it in the 2000 help?

Thanks,

Jeff