Quote:
|
Originally Posted by blue68f100
If you do not care about the data. There is an option to reset to factory settings. You also need to disable the AV and Snapshots. Then remove the raid5. Power down and remove all drives except #1. Once up Hot swap a new drive in to Slot #2. Once finished. Power down and swap drive 2 to 1. Reboot. Once up you can hot swap the rest of the drives in. Then do a setup like a new server.
|
Now I am stuck. I delete RAID 5 then power down the system. remove drive#2, drive #3 and drive #4. Then I power on SNAP4500 and there is only drive #1 available, so what do I do now? create RAID 0? (this is the only option) or what's next step?
David