Pro/Forums - View Single Post

ibmkg · 09-02-2007, 04:27 AM

If it is the thermal cutout then during post you should get message regarding it. Have you checked the logs in bios?

If your voltage is below 12V (when reading taken from a multimeter), it means that your PSU is struggling. This causes ripples. While 11.50 + would work, it would hurt in a long run. Low voltage (usually, considering not too low) is not the reason for shutdown.

09-02-2007, 04:27 AM	#11
ibmkg Cooling Savant Join Date: Jan 2005 Location: USA Posts: 129	Re: Time to worry 8800ultra temp If it is the thermal cutout then during post you should get message regarding it. Have you checked the logs in bios? If your voltage is below 12V (when reading taken from a multimeter), it means that your PSU is struggling. This causes ripples. While 11.50 + would work, it would hurt in a long run. Low voltage (usually, considering not too low) is not the reason for shutdown. __________________ NOTE: Suggestions are based on my perceptive. I could be erroneous. Therefore, no one has the right to criticize an individual other than rephrasing and or expressing his own annotations on the subject matter itself.