[hiljak]

I got the SNAP 4100 going. The processor fan has failed and the unit appears to have overheated. I have another fan on it now and have got it to boot up. It tries to check the status of the disk, it made it to 85%, then gave an error.

Here is a cut from the log:

E File System Check : FSCK fatal error = 39 Disk 60000 9/13/2007 10:18:00 PM
E File System Check : Bad state 7 for inode I=6235992 Disk 60000 9/13/2007 10:18:00 PM
W File System Check : Summary information bad (Salvaged) Disk 60000 9/13/2007 10:16:55 PM
W File System Check : Blk(s) missing in bit maps (Salvaged) Disk 60000 9/13/2007 10:16:55 PM
W File System Check : Free blk count(s) wrong in superblk (Salvaged) Disk 60000 9/13/2007 10:16:55 PM
I File System Check : ** Phase 5 - Check cylinder groups Disk 60000 9/13/2007 10:16:43 PM
I File System Check : ** Phase 4b - Check backlinks Disk 60000 9/13/2007 10:16:31 PM
I File System Check : ** Phase 4 - Check reference counts Disk 60000 9/13/2007 10:16:12 PM
I File System Check : ** Phase 3 - Check connectivity Disk 60000 9/13/2007 10:16:12 PM
I File System Check : ** Phase 2 - Check pathnames Disk 60000 9/13/2007 10:15:57 PM
I File System Check : ** Phase 1b - Rescan for more duplicate blocks Disk 60000 9/13/2007 10:15:57 PM
I File System Check : ** Phase 1 - Check blocks and sizes Disk 60000 9/13/2007 10:09:51 PM
W File System Check : partition is NOT clean. Disk 60000 9/13/2007 10:09:51 PM
I File System Check : Executing fsck /dev/rraid0 /force /fix /fixfatal Disk 60000 9/13/2007 10:09:50 PM


Any ideas?