Pro/Forums - View Single Post

TheMoose · 11-08-2007, 06:01 PM

Ok, pulling my hair out now. Honestly, I'm not a dumb ass, but I cannot figure out why this isn't working.

1) Installed original drive in pc as primary master

2) Installed new drive in pc as primary slave

3) Used Digital Dolly to copy 3% of RAW data from original drive to new drive

4) Installed ORIGINAL drive into SNAP and setup IP address via "Assist" application as 192.168.2.150

5) Removed original drive from SNAP

6) Installed new drive into SNAP

7) Attempted to connect to new drive via "Assist" application

8) Attempted to connect to new drive via http://192.168.2.150/config

9) Attempted to connect to new drive via http://192.168.2.150/config/debug

10) Attempted to connect to new drive via http://SNAP214400/config

11) Attempted to connect to new drive via http://SNAP214400/config/debug

NO connection attempts worked.

If I put the original drive back in then the SNAP works like a champ.

11-08-2007, 06:01 PM	#10
TheMoose Cooling Neophyte Join Date: Nov 2007 Location: Ohio Posts: 16	Re: Replace Drive on 1100 Snap Appliance Ok, pulling my hair out now. Honestly, I'm not a dumb ass, but I cannot figure out why this isn't working. 1) Installed original drive in pc as primary master 2) Installed new drive in pc as primary slave 3) Used Digital Dolly to copy 3% of RAW data from original drive to new drive 4) Installed ORIGINAL drive into SNAP and setup IP address via "Assist" application as 192.168.2.150 5) Removed original drive from SNAP 6) Installed new drive into SNAP 7) Attempted to connect to new drive via "Assist" application 8) Attempted to connect to new drive via http://192.168.2.150/config 9) Attempted to connect to new drive via http://192.168.2.150/config/debug 10) Attempted to connect to new drive via http://SNAP214400/config 11) Attempted to connect to new drive via http://SNAP214400/config/debug NO connection attempts worked. If I put the original drive back in then the SNAP works like a champ.