Pro/Forums - View Single Post

Phoenix32 · 11-10-2007, 10:48 AM

Reboot the unit (a clean power off reboot) and then try. Also, turn off (disable) any of the extras you might have running (like the CA AV). Once you have done that, try again.

If that don't work, try adding some memory (PC2100 ECC Reg DDR).

If that don't work, force it into recovery mode and try there.

If that don't work, then come grab me in e-mail and we will see what we can do (no, I am not free of charge for this type work).

11-10-2007, 10:48 AM	#3
Phoenix32 Thermophile Join Date: May 2006 Location: Yakima, WA Posts: 1,282	Re: Snap Server 4500 OS Upgrade Issue Reboot the unit (a clean power off reboot) and then try. Also, turn off (disable) any of the extras you might have running (like the CA AV). Once you have done that, try again. If that don't work, try adding some memory (PC2100 ECC Reg DDR). If that don't work, force it into recovery mode and try there. If that don't work, then come grab me in e-mail and we will see what we can do (no, I am not free of charge for this type work). __________________ ~ 6 x Snap 4400 (SATA Converted) 2 x Snap 4500 (SATA Converted) 1 x Snap 110 5 x Snap 410 3 x Snap 520 2 x Sanbloc S50 Drives from 250GB to 2TB (PATA, SATA, and SAS) GOS v5.2.067 All subject to change, day by day......