Pro/Forums - View Single Post

blue68f100 · 11-26-2007, 05:52 AM

If you had it set up as a RAID 0, all that has to happen is loose 1 drive and every thing is lost. If you still have access to the admin, only 1 drive is down. If none you have 2 dead, and will require a image file or a working drive from another 2200 to get back up. After resetting back to factory, you need to run assist to locate the snap and do the initial setup, network Address.

11-26-2007, 05:52 AM	#3
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: NO DISK Snap 2200 If you had it set up as a RAID 0, all that has to happen is loose 1 drive and every thing is lost. If you still have access to the admin, only 1 drive is down. If none you have 2 dead, and will require a image file or a working drive from another 2200 to get back up. After resetting back to factory, you need to run assist to locate the snap and do the initial setup, network Address. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820