Pro/Forums - View Single Post - snap! server 1100 not found with snap assist

blue68f100 · 11-28-2007, 01:28 PM

Under the disk utility menu from the gui you can do the init there. If you have access and it's not doing working from the debug page enter "co de format 10000/reinit" should take care of it. Depending opon the drive size this can take a log time. If the disk led is solid it's working on it.

Now there are a few 1000's that have firmware in flashram. On these you have gui access with out HD's.

11-28-2007, 01:28 PM	#4
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: snap! server 1100 not found with snap assist Under the disk utility menu from the gui you can do the init there. If you have access and it's not doing working from the debug page enter "co de format 10000/reinit" should take care of it. Depending opon the drive size this can take a log time. If the disk led is solid it's working on it. Now there are a few 1000's that have firmware in flashram. On these you have gui access with out HD's. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820