Thank you blue68f100 for the welcome back.
It makes sense now that I see it in print. Sounds like you could make a quick door stop out of one if you are not careful.
I have a question for you Dave. I know it can be done because it was hinted about in the ASK at adaptec support.
With SnapOS, how can I make two partitions on one 250GB drive using the debug command. I'm not concerned about having share1 and share2. That will not be a problem.
Thanks,
bitor
Quote:
|
Originally Posted by blue68f100
If you turn off auto reboot the unit does not enable some of the settings. It has to reboot to load the specific code to the server. The platformbytes is an imbedded code the makes the destinction between different revisions of the models. If you turn off auto reboot and do not unlock the bios, change are only tempary till it reboots. Doing it this way, reboot will reverse the settings, away to recover. But once you unlock the bios and make the changes it looks for code specific to that platform. If right every thing works. But if it does not find the hardware it looks for it locks up and give you the 1 x 2 led pattern.
Then you have to pay the piper to get it fixed.
You have been quiet Bitor..... Welcome back.
I like this mega post, new members are in shock, havn't see any threads this long before. And loaded with a wealth of information.
|