Pro/Forums - View Single Post

Phoenix32 · 02-24-2008, 05:53 PM

The mod is just to change the IDE cables from a -001 or -002 revision into C/S cables. I don't remember which message thread it was anymore, but I did post some info to do it a while back. But in your case, it is easy. Just look at the cables from your -004 unit (look for the cut cable lead) and then cut your -002 cables to match them. That's it. Just remember, the drives will need to be C/S then. I have no idea for sure how safe the data will be when doing this. Back the data up first.

02-24-2008, 05:53 PM	#9
Phoenix32 Thermophile Join Date: May 2006 Location: Yakima, WA Posts: 1,282	Re: Snap 4000 smart error The mod is just to change the IDE cables from a -001 or -002 revision into C/S cables. I don't remember which message thread it was anymore, but I did post some info to do it a while back. But in your case, it is easy. Just look at the cables from your -004 unit (look for the cut cable lead) and then cut your -002 cables to match them. That's it. Just remember, the drives will need to be C/S then. I have no idea for sure how safe the data will be when doing this. Back the data up first.