Thread: cooling basics
View Single Post
Unread 02-28-2008, 11:30 PM   #12
HammerSandwich
Cooling Savant
 
Join Date: Oct 2003
Location: 15143
Posts: 358
Default Re: cooling basics

I've seen the other replies, but it's too much to respond to now. Let's just say that I have a VERY quiet WC rig, and I'm about to OC an E3110 with a Ninja.

Quote:
Originally Posted by dht_99
What are you driving?
I have a '93 FD. Early production, US Touring model. But I've semit-gutted it. Actually, I've made a LOT of mods without driving it at all, so this summer should be a learning experience.

My basic setup is an intake, non-sequential turbos, bigger IC, street-port and full exhaust. I ported the wastegate and have a Power FC that requires tuning. A few ceramic coatings and reliability mods. The suspension is Koni Yellows with a Ground Control coil-over kit with springs at 500F/350R. The engine has maybe 15k on it, so I'm hoping to keep things conservative at maybe 12psi & 320rwhp. We'll see how it turns out.

My driving is definitely rusty now, since I haven't raced karts in 5+ years. But the RX will be a blast to drive. I just have to get it dialed in.
__________________
www.procooling.com: It's true we are often a bunch of assholes
HammerSandwich is offline   Reply With Quote