Pro/Forums - View Single Post

blue68f100 · 04-24-2008, 09:39 AM

User Assist.

You will be instructed to put the snap into FLUP mode this is 5 blinks , done the same way as the factory reset. When you do wait (give) the unit 30 sec or it will not sync up, she you press the continue button.

Make sure you screen saver is turned off. and if you get a error saying it did not respond use the back arrow to keep it on the correct page. There is a pretty good delay but this is normal.

04-24-2008, 09:39 AM	#512
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap OS 3.4.805, anyone? User Assist. You will be instructed to put the snap into FLUP mode this is 5 blinks , done the same way as the factory reset. When you do wait (give) the unit 30 sec or it will not sync up, she you press the continue button. Make sure you screen saver is turned off. and if you get a error saying it did not respond use the back arrow to keep it on the correct page. There is a pretty good delay but this is normal. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820