Pro/Forums - View Single Post

=ACID RAIN= · 05-05-2008, 08:55 PM

I would say it would have to be a sensitive pump or prone to failure anyways, because I have those 90s on my viperfang and it's been running like this for years. Even before this I had a fusionHL, which is a similar design with regard to flow angles.

I agree with Ben though on the copper 90s or 45s. Ideally I would like to plumb most of my system with pipe and some copper 90s, but I don't have time right now to attempt that.

05-05-2008, 08:55 PM	#11
=ACID RAIN= Cooling Neophyte Join Date: May 2008 Location: Kingwood, TX Posts: 6	Re: Recent new WCer looking for feedback I would say it would have to be a sensitive pump or prone to failure anyways, because I have those 90s on my viperfang and it's been running like this for years. Even before this I had a fusionHL, which is a similar design with regard to flow angles. I agree with Ben though on the copper 90s or 45s. Ideally I would like to plumb most of my system with pipe and some copper 90s, but I don't have time right now to attempt that. __________________ Gamer: Q6600 G0 3.6 1.4v . Abit IP35 Pro . 2GB Ballistix 800 . eVGA 8800GT . 560w SS Zeus . 320GB SATA . 36GB 10k SATA Wife's: E6300 . Asus P5B . 2GB G.Skill 800 . eVGA 7900GT . 500w OCZ . 2 x 120GB PATA File Server: E6600@3GHz . GA-G31M-S2L . 1GB Adata 800 . 500w . 4x400GB RAID5 on S150 SX4 . 120GB SATA MY HEAT