It should work. What do you have to loose? Follow the directions in the forum on how to image and post back if it works or not.
Follow link for info:
http://wiki.procooling.com/index.php...de_Information
My understanding of the flash models that work like that(automatically install the SnapOS) are the much older ones. The newer ones I believe do not function that way. The flash however holds some important configure information but is only good IF the SnapOS image is installed on the hard drive.
bitor
Quote:
|
Originally Posted by Steevo
I have a working Snap 1000 with a 40 gb drive. Would that drive work to reimage the 250 GB drive in the 1100?
I have to say since I have this nice flash based UI it does seem like the snapserver is working. I was under the impression the UI was all on the disk, but in this model that is clearly not the case. The disk is completely unnecessary for me to use the UI, assign IP address, pw, etc. Proof is I was able to do all that and I have no disk.
Some of these snapservers can apparently prep a new drive and do so automatically as soon as you put one in. This 1100 is not like that?
Maybe the drive is just bad.
|