Pro/Forums - View Single Post

Steevo · 06-14-2008, 06:09 PM

I pasted that line in the debug window, no success.

6/14/2008 19:02:44 Command: co de format 10000/init

Invalid device id 10000 requested

------------
Command returned with console error 1.

I just put it in 5 blink mode, but do I hold down reset for restart, or do I just push the update down with assist while it is blinking? The directions here say to continue reset but the 5 blink state is not really reset, like the 1-4 blinks.

So, after I get the disk light blinking 5x what then?

OK, I got the disk light blinking 5x and held down reset.
The unit restarted. The system and disk lights are blinking 1x together. The link light is on steady.

I have been trying to access it with assist. No success. Assist says "The ip address of the server is currently in use or unreachable."

I cannot connect with assist nor with the IP address via the web interface in this mode. Assist does seem to see it, but it might be lying. It's on the list and I can get info which is correct.

Here is my system log, same as before.

Message Source Date Time
E LCD Message : FAILED: Disk 1 System 6/14/2008 7:30:12 PM
I INIT: Setting IP address to 192.168.1.30 Network 6/14/2008 7:30:02 PM
S System Initialization : Server v4.0.860
Build Date: Mar 2 2005 17:50:55
Boot Count: 14

06-14-2008, 06:09 PM	#19
Steevo Cooling Neophyte Join Date: Jun 2008 Location: USA Posts: 22	Re: Snap 1100 with no disk found I pasted that line in the debug window, no success. 6/14/2008 19:02:44 Command: co de format 10000/init Invalid device id 10000 requested ------------ Command returned with console error 1. I just put it in 5 blink mode, but do I hold down reset for restart, or do I just push the update down with assist while it is blinking? The directions here say to continue reset but the 5 blink state is not really reset, like the 1-4 blinks. So, after I get the disk light blinking 5x what then? OK, I got the disk light blinking 5x and held down reset. The unit restarted. The system and disk lights are blinking 1x together. The link light is on steady. I have been trying to access it with assist. No success. Assist says "The ip address of the server is currently in use or unreachable." I cannot connect with assist nor with the IP address via the web interface in this mode. Assist does seem to see it, but it might be lying. It's on the list and I can get info which is correct. Here is my system log, same as before. Message Source Date Time E LCD Message : FAILED: Disk 1 System 6/14/2008 7:30:12 PM I INIT: Setting IP address to 192.168.1.30 Network 6/14/2008 7:30:02 PM S System Initialization : Server v4.0.860 Build Date: Mar 2 2005 17:50:55 Boot Count: 14 Last edited by Steevo; 06-14-2008 at 06:30 PM.