Quote:
|
Originally Posted by blue68f100
You can try the 1000, but I think the odds are against you. There may be enough to boot it, then reload the OS. The image file has been called several things 2200.bin, Snap2200.bin are the most common. The 1100 and 2200 are the only SnapOS units with the OS on the HD.
But I would recommend backing up the 1000 before removing the HD. The cmd line is not forgiving it you make a mistake and get the source and dest reversed. I would recommend removing all other HD from the PC to be used, this way you can match the instructions to the letter.
Before I would do any of this. I would boot the 1100 and leave it on over night then see if it comes up. This is one of the biggest mistakes users make, not giving it enough time to do what it needs to do.
|
I left it on for a couple of days, it never changed during that time.
I have another 1100 with an 80GB, but I can't get anywhere with it, no ui, cannot connect with assist, nothing. It seems failed. I did reset it with 4 blinks. I got nothing.
Would you recommend I find a working 1100 of any capacity to clone from?
I may be able to come up with one. If that is better than the one working 1000 for some reason. I really don't understand the difference between these models in this instance.