View Single Post
Unread 06-19-2008, 04:39 PM   #4
blue68f100
Thermophile
 
blue68f100's Avatar
 
Join Date: Jul 2005
Location: Plano, TX
Posts: 3,135
Default Re: 2200 Transfer Errors

Was that the complete log? It was real short.

What size HD's and MFG?

The SnapOS is not compatiable with VISTA. If your using it STOP. Vista dowes some screwey network and file things.

Never have liked Raid0, always trouble. Your required to have a good backup system.

I would confirm that the cooling fan is staying on, and the unit is clean (free of dust). A dirty unit makes them run hot. I have seen several work on startup, but once they got hot would shutdown. Then they would restart once they cool off, intermitten cooling.

The logs reports superblock problems. This is the critical part of the HD's file system.

I would run Spinrite on the HD's and confirm that the HD's are healthy. Make sure you mark drive position so they go back the same way.

Another test would be to let the unit cool down over night and try again. If it works then it's more than likely a cooling issue.
__________________
1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5,
1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5,
1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy

Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820
blue68f100 is offline   Reply With Quote