View Single Post
Unread 08-25-2008, 04:30 AM   #26
blue68f100
Thermophile
 
blue68f100's Avatar
 
Join Date: Jul 2005
Location: Plano, TX
Posts: 3,135
Default Re: Dell PowerVault 705N upgrade help

Shares 1-4 are the drives. You have to build the Raid5 array before you have any redundancy. The 200's should have been seen and OS transfered to them. Remove the HD and see if you can connect. If not, you need to reload the OS. If the lang set is on the original use the originals to transfer the os. But it sounding more and more like you need to re-install the os. Adaptec/Storageworks have been releasing the v3 on email request but not v4 unless they have record of you owning it.

Now the Dell OS and Hardware was setup a little different than the Snap. Unless someone make the BIOS change you will need the Dell Version. Which stoped at v3. The reason most switched over to the Snap OS.
__________________
1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5,
1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5,
1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy

Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820
blue68f100 is offline   Reply With Quote