Pro/Forums - View Single Post - PC Power and Cooling 400 W Power Supply NOT ENOUGH 12v

EMC2 · 02-10-2002, 10:54 PM

The one I referenced is a semi-stripped down system I'm using to do look see at a m/b and memory with.

A7V266-E
XP1800+ (unlocked)
512MB (brand witheld) PC2700 DDR
Hercules Prophet GF2 GTS 64MB
3Com 905C 10/100 Nic
A pair of Baracuda IVs
Toshiba SM1612 DVD drive

In the course of sorting out the memory and m/b I've done testing at everything from 1200 to 1750Mhz CPU core speeds and 100 to 165Mhz FSB speeds, and VCore settings to 1.85V, runs of Prime95, Memtest86, DocMem, 3dMark2000, Sandra, and some custom test software. The +5V rail has only changed -10mV during any of the testing. The +3.3V rail has only has moved +/- 10mV. The +12V rail has fluctuated the most, MBM5 recorded a couple of times it moving 30mV.

Once I get the core components sorted out and the testing done, then I may end up moving my SCSI drives and other toys over to it

02-10-2002, 10:54 PM	#15
EMC2 Cooling Savant Join Date: Feb 2002 Location: Dark Side of the Moon Posts: 365	The one I referenced is a semi-stripped down system I'm using to do look see at a m/b and memory with. A7V266-E XP1800+ (unlocked) 512MB (brand witheld) PC2700 DDR Hercules Prophet GF2 GTS 64MB 3Com 905C 10/100 Nic A pair of Baracuda IVs Toshiba SM1612 DVD drive In the course of sorting out the memory and m/b I've done testing at everything from 1200 to 1750Mhz CPU core speeds and 100 to 165Mhz FSB speeds, and VCore settings to 1.85V, runs of Prime95, Memtest86, DocMem, 3dMark2000, Sandra, and some custom test software. The +5V rail has only changed -10mV during any of the testing. The +3.3V rail has only has moved +/- 10mV. The +12V rail has fluctuated the most, MBM5 recorded a couple of times it moving 30mV. Once I get the core components sorted out and the testing done, then I may end up moving my SCSI drives and other toys over to it