Pro/Forums - View Single Post

GuyBFF · 08-04-2001, 03:23 AM

The maze 2 will usually level out well on it's own as long as the hoses aren't placing any forces on it.

I do however extra lap mine with 1000, 1500 and 2000 grit wet paper. When you pull the block off and wipe off the Arctic Silver II, there will be an imprint of the core (you will be able to read the writing backwards!) so I know it's on there flat. The extra lapping does nothing for cooling I found (as the Danger Den products are very flat, unlike the buffed products out there).

PHaestus has it though. My DigiDoc reports 15c lower after watercooling, yet ASUS probe and MBM5 only slightly cooler than air.

08-04-2001, 03:23 AM	#5
GuyBFF Cooling Savant Join Date: Jun 2001 Location: Winnipeg, MB, CA Posts: 242	The maze 2 will usually level out well on it's own as long as the hoses aren't placing any forces on it. I do however extra lap mine with 1000, 1500 and 2000 grit wet paper. When you pull the block off and wipe off the Arctic Silver II, there will be an imprint of the core (you will be able to read the writing backwards!) so I know it's on there flat. The extra lapping does nothing for cooling I found (as the Danger Den products are very flat, unlike the buffed products out there). PHaestus has it though. My DigiDoc reports 15c lower after watercooling, yet ASUS probe and MBM5 only slightly cooler than air. __________________ A7V8X Danger Den Maze II Danner Mag Drive 350 Heater Core Style Rad Thunderbird 1400 (Soon Barton) 512mb PC2700 CL2 Promise SX4000 Raid 5 w/256mb PC133 Cache 4x40gb Western Digital 7200hdd Plus More...