[rpmurray]

This just in.

Because I've been busy this morning I just left the Snap running since then, without doing anything to it. Now when I check using "info dev" it shows:

Logical Device: 10006 Position: 0 JBOD Size (KB): 32296 Free (KB): 23368 Private Mounted
Label:Private Contains system files only
Unique Id: 0x07E172C1151F56A0 Mount: /priv Index: 12 Order: 0
Partition: 10006 Physical: 10007 FS Size (KB): 32768 Starting Blk: 515 Private
Physical: 10007 Drive Slot: 0 IDE Size (KB): 134217216 Fixed

Logical Device: 1000E Position: 0 JBOD Size (KB): 32296 Free (KB): 22136 Private Mounted
Label:Private Contains system files only
Unique Id: 0x5DE062EE74C7D817 Mount: /pri2 Index: 13 Order: 1
Partition: 1000E Physical: 1000F FS Size (KB): 32768 Starting Blk: 515 Private
Physical: 1000F Drive Slot: 1 IDE Size (KB): 134217216 Fixed

Logical Device: 60000 Position: 1 RAID Size (KB): 400329600 Free (KB): 0 Public Unmounted
Label:RAID5 Large data protection disk
Unique Id: 0x343BC2672C5DC315 Mount: /0 Index: 0 Order: 255
Partition: 10000 Physical: 10007 R 60000 Size (KB): 133443200 Starting Blk: 96624 Public
Physical: 10007 Drive Slot: 0 IDE Size (KB): 134217216 Fixed
Partition: 10008 Physical: 1000F R 60000 Size (KB): 133443200 Starting Blk: 96624 Public
Physical: 1000F Drive Slot: 1 IDE Size (KB): 134217216 Fixed
Partition: 10010 Physical: 10017 R 60000 Size (KB): 133443200 Starting Blk: 96624 Public
Physical: 10017 Drive Slot: 2 IDE Size (KB): 134217216 Fixed
Partition: 10018 Physical: 1001F R 60000 Size (KB): 133443200 Starting Blk: 96624 Public
Physical: 1001F Drive Slot: 3 IDE Size (KB): 134217216 Fixed

Please note that it now says that Logical Devices 10006 and 1000E are mounted, whereas before they were unmounted.

The Disk 1 LED is still doing the on for 5 seconds, off for 2 seconds thing. "info log t" is showing:

12/03/2008 14:16:24 37 D SYS | DISK: req=0xDC2758 dev=0x80000 fn=1 blk=0x4B1810 sts=20
12/03/2008 14:16:31 37 D SYS | DISK: req=0xDC2758 dev=0xC0000 fn=1 blk=0x4B1820 sts=19
12/03/2008 14:16:35 37 D SYS | DISK: req=0xDC2758 dev=0xC0000 fn=1 blk=0x4B1820 sts=20
12/03/2008 14:16:36 37 D SYS | DISK: req=0xDC2758 dev=0x80000 fn=1 blk=0x4B1820 sts=20
12/03/2008 14:16:42 37 D SYS | DISK: req=0xDC2758 dev=0xC0000 fn=1 blk=0x4B1830 sts=19
12/03/2008 14:16:46 37 D SYS | DISK: req=0xDC2758 dev=0xC0000 fn=1 blk=0x4B1830 sts=20
12/03/2008 14:16:46 37 D SYS | DISK: req=0xDC2758 dev=0x80000 fn=1 blk=0x4B1830 sts=20
12/03/2008 14:16:52 37 D SYS | DISK: req=0xDB37C0 dev=0xC0000 fn=1 blk=0x4B1840 sts=19
12/03/2008 14:16:57 37 D SYS | DISK: req=0xDB37C0 dev=0xC0000 fn=1 blk=0x4B1840 sts=20
12/03/2008 14:16:57 37 D SYS | DISK: req=0xDB37C0 dev=0x80000 fn=1 blk=0x4B1840 sts=20
12/03/2008 14:17:03 37 D SYS | DISK: req=0xDB37C0 dev=0xC0000 fn=1 blk=0x4B1850 sts=19
12/03/2008 14:17:07 37 D SYS | DISK: req=0xDB37C0 dev=0xC0000 fn=1 blk=0x4B1850 sts=20
12/03/2008 14:17:07 37 D SYS | DISK: req=0xDB37C0 dev=0x80000 fn=1 blk=0x4B1850 sts=20
12/03/2008 14:17:14 37 D SYS | DISK: req=0xDB37C0 dev=0xC0000 fn=1 blk=0x4B1860 sts=20
12/03/2008 14:17:18 37 D SYS | DISK: req=0xDB37C0 dev=0xC0000 fn=1 blk=0x4B1860 sts=20
12/03/2008 14:17:18 37 D SYS | DISK: req=0xDB37C0 dev=0x80000 fn=1 blk=0x4B1860 sts=20

I'm no longer seeing the E error messages. "info log p" now is showing me the same listing as "info log t" but it will now let me see the history, except anything that happened between the last reboot on 11/12 and today.

Disk Status is telling me, "RAID5 - Large data protection disk Checking. 5% complete ".

Check or Repair Disk is still telling me "no disks found".

Only 5% since this morning? I'm going to leave it running overnight and see what it says tomorrow. Got a feeling it's going to tell me disk 1 is hosed.