Pro/Forums - View Single Post

acetylene · 12-07-2008, 06:02 PM

I've even gone so far as to setup a laptop with 10.10.10.11/24 as the address and using a crossover cable to connect to port 2 on the Snap, but I still cannot reach it via IP.

Also, I cannot get into BIOS because there is no VGA even at post. The hard disks appear to contain the GOS software but I'm concerned there's a hardware issue. What I need at this point are specific instructions on performing the reset (using the white reset button behind the face). Can anyone provide that, or point me toward some good documentation?

Thanks...

12-07-2008, 06:02 PM	#8
acetylene Cooling Neophyte Join Date: Dec 2008 Location: Atlanta, GA Posts: 6	Re: 4500 no display from vga port I've even gone so far as to setup a laptop with 10.10.10.11/24 as the address and using a crossover cable to connect to port 2 on the Snap, but I still cannot reach it via IP. Also, I cannot get into BIOS because there is no VGA even at post. The hard disks appear to contain the GOS software but I'm concerned there's a hardware issue. What I need at this point are specific instructions on performing the reset (using the white reset button behind the face). Can anyone provide that, or point me toward some good documentation? Thanks...