Pro/Forums - View Single Post

acetylene · 12-07-2008, 07:08 PM

OK, so after a LOT of reading, I have gathered some additional information. The only lights I get are the System LED (I believe it's green, but I have red-green color blindness and green vs amber in LEDs is very difficult for me to discern), and a NIC light if connected. I get no lights whatsoever on the HDD LEDs.

Also, as before I get no useful information from the serial port. It just shows the bit about remote bios flash as noted in my earlier post.

I am off try and get it to pickup DHCP one more time, but I suspect with the serial non-responsiveness and the lack of LEDs on the HDDs mean I've got serious hardware issues.

12-07-2008, 07:08 PM	#9
acetylene Cooling Neophyte Join Date: Dec 2008 Location: Atlanta, GA Posts: 6	Re: 4500 no display from vga port OK, so after a LOT of reading, I have gathered some additional information. The only lights I get are the System LED (I believe it's green, but I have red-green color blindness and green vs amber in LEDs is very difficult for me to discern), and a NIC light if connected. I get no lights whatsoever on the HDD LEDs. Also, as before I get no useful information from the serial port. It just shows the bit about remote bios flash as noted in my earlier post. I am off try and get it to pickup DHCP one more time, but I suspect with the serial non-responsiveness and the lack of LEDs on the HDDs mean I've got serious hardware issues.