Greetings, I had the same error and upgrading to the newest SnapOS and it did fix the problem. When I say problem I mean it let me fix the errors on the HD and mount the hard drive. Any time you "fix" a problem on a hard drive you run the chance of losing data. The upgrade worked for me , but that doesn't mean it will for you. I would try it because you only have two options at this point and the other is a data recovery option. Snaptech does this type of stuff here and he is reasonable if you decide that this is your better option.
best of luck,
bitor
Quote:
Originally Posted by Dysfunction
Model: 1000
Software: 4.0.824
Hardware: 3.1.1
BIOS: 2.1.364
120GB
I bought this used with a new upgraded drive, and it worked fine for about a year, then the disk developed a problem.
Fsck can't fix it, evidently due to insufficient heap. This is the end of the error log:
E - File System Check: Bad state 0 for inode I=-1072168960
E - File System Check: FSCK fatal error = 39
W - System Initialization: Not enough heap for additional bio bufs
There are some irreplaceable photo jpgs on the drive that I must recover, what are my options? Will upgrading to 4.0.860 possibly fix it?
|