Quote:
Originally Posted by blue68f100
You must first unlock the bios before any changes will be saved. Once the settings changed lock the bios back.
|
This is what I have been doing. Settings are stored through a warm boot. But lost during a cold boot.
Boot log follows:
Quote:
================================================== ==================
03/24/2009 14:49:05 ERROR Ethernet driver : Checksum, signature or ethernet address is wrong. Defaulting E2-Image.
================================================== ==================
The previous message occurred in the following context within the system log:
03/24/2009 14:49:14 INFORMATION System Initialization : Initialization Complete! Memory to be released: 71771472 bytes.
03/24/2009 14:49:14 INFORMATION File System : Opened FDB for device 0x60000
03/24/2009 14:49:14 INFORMATION File System Check : partition is clean.
03/24/2009 14:49:14 INFORMATION File System Check : Executing fsck /dev/rraid0 /fix
03/24/2009 14:49:14 INFORMATION File System : Opened FDB for device 0x1000E
03/24/2009 14:49:12 INFORMATION File System Check : partition is clean.
03/24/2009 14:49:12 INFORMATION File System Check : Executing fsck /dev/ride1g /fix /fixfatal
03/24/2009 14:49:12 INFORMATION File System : Opened FDB for device 0x10006
03/24/2009 14:49:12 INFORMATION File System Check : partition is clean.
03/24/2009 14:49:12 INFORMATION File System Check : Executing fsck /dev/ride0g /fix /fixfatal
03/24/2009 14:49:05 INFORMATION INIT: Setting IP address to 192.168.1.108
03/24/2009 14:49:05 System Initialization : Server v4.0.860
Build Date: Mar 2 2005 17:50:35
Boot Count: 7
03/24/2009 14:49:05 ERROR Ethernet driver : Checksum, signature or ethernet address is wrong. Defaulting E2-Image.
03/24/2009 14:49:05 WARNING Ethernet driver : Writing whole image.
03/24/2009 14:49:05 WARNING Ethernet driver : Changing platform bytes from 0.0.0 (0) to 0.0.0 (2).
03/24/2009 14:49:05 WARNING Ethernet driver : Changing model byte from 0x00 to 0x02.
03/24/2009 14:49:05 ERROR Ethernet driver : Checksum, signature or ethernet address is wrong. Defaulting E2-Image.
03/24/2009 14:49:05 ERROR Ethernet driver : Checksum, signature or ethernet address is wrong. Defaulting E2-Image.
03/24/2009 14:49:05 WARNING Ethernet driver : Writing whole image.
03/24/2009 14:49:05 WARNING Ethernet driver : Changing platform bytes from 0.0.0 (0) to 2.0.1 (0).
03/24/2009 14:49:05 ERROR Ethernet driver : Checksum, signature or ethernet address is wrong. Defaulting E2-Image.
|
Thanks again, Bob