Pro/Forums - View Single Post

GuyBFF · 08-07-2001, 09:51 PM

If your BIOS show 1005a/FXD then it's the version with idle (as long as you enable PCI Master Read Caching, and Delayed Transaction in CMOS). Otherwise if it said 1005a then the flash did not update. Either your using a bad program, bad copy of BOIS file, or have some sort of shadowing enabled (always disable shadowing before flashing).

In MBM 5 with a A7V133:

Asus 1 is Motherboard
Asus 2 is CPU
Asus 3 is JTPWR (external thermister)
Asus 2 CUSL2 doesn't exhist (it will default back to Asus 2)

The higher one is probably you CPU, the second one is the Motherboard, and unless you attached an external thermister or power supply temperature lead, ASUS 3 will probably show negative.

08-07-2001, 09:51 PM	#13
GuyBFF Cooling Savant Join Date: Jun 2001 Location: Winnipeg, MB, CA Posts: 242	If your BIOS show 1005a/FXD then it's the version with idle (as long as you enable PCI Master Read Caching, and Delayed Transaction in CMOS). Otherwise if it said 1005a then the flash did not update. Either your using a bad program, bad copy of BOIS file, or have some sort of shadowing enabled (always disable shadowing before flashing). In MBM 5 with a A7V133: Asus 1 is Motherboard Asus 2 is CPU Asus 3 is JTPWR (external thermister) Asus 2 CUSL2 doesn't exhist (it will default back to Asus 2) The higher one is probably you CPU, the second one is the Motherboard, and unless you attached an external thermister or power supply temperature lead, ASUS 3 will probably show negative. __________________ A7V8X Danger Den Maze II Danner Mag Drive 350 Heater Core Style Rad Thunderbird 1400 (Soon Barton) 512mb PC2700 CL2 Promise SX4000 Raid 5 w/256mb PC133 Cache 4x40gb Western Digital 7200hdd Plus More...