Pro/Forums - View Single Post - Snap server 2000

blue68f100 · 05-07-2009, 02:49 PM

Here is the link http://ftp.overlandstorage.com/cm/tm...OS_4_0_860.exe

It should be complete along with Assist. Assist will locate the unit and allow the inital setup. Once complete the language flag will get set correctly and a IP will be set. If you did a reset to factory it cleared the network settings to 0.0.0.0. Assist must be used to correct this. If your system led is not in the normal heartbeat pattern, there may still be a problem.

05-07-2009, 02:49 PM	#6
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap server 2000 - failure HELP! Here is the link http://ftp.overlandstorage.com/cm/tm...OS_4_0_860.exe It should be complete along with Assist. Assist will locate the unit and allow the inital setup. Once complete the language flag will get set correctly and a IP will be set. If you did a reset to factory it cleared the network settings to 0.0.0.0. Assist must be used to correct this. If your system led is not in the normal heartbeat pattern, there may still be a problem. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820