Pro/Forums - View Single Post

micr0 · 09-16-2009, 08:33 AM

What was the status on your LEDs when you fired up the snapserver? When I had the jumpers connected, I would get two solid green lights. One for power and one for the hdd. Once I removed the jumper, that's when all the magic happened. Have you gone into the bios to double check all your settings? From hyperterminal, I was able to see the system boot up to the point of when freenas was starting to load up. After, that it was just a matter of bringing up the web interface to login.

09-16-2009, 08:33 AM	#14
micr0 Cooling Neophyte Join Date: Jun 2009 Location: Sacramento Posts: 8	Re: FreeNAS on Snap Server 110 / 210 What was the status on your LEDs when you fired up the snapserver? When I had the jumpers connected, I would get two solid green lights. One for power and one for the hdd. Once I removed the jumper, that's when all the magic happened. Have you gone into the bios to double check all your settings? From hyperterminal, I was able to see the system boot up to the point of when freenas was starting to load up. After, that it was just a matter of bringing up the web interface to login.