Pro/Forums - View Single Post - Proud owner of new EMCO mill, need some US help

mwolfman · 11-22-2009, 03:33 AM

Dont know if anybody around here are alive but it's worth a shoot.

I want a CNC-mill that is able to handle steel parts up to 400*600*150mm (so that it can be used for my bike/car).
I dont care about time, I can leave it on during weekdays while I at work and then pause it when coming home. If I could use a good software then I could let it manufacture parts for me while I'm on business trips, but then I need an magazine for drill bits and parts.

So requirements:
An fairly large surface area.
3-axis CNC (preferably with a spinning table as an option)
Small (has to fit my kitchen bench)
Water cooling (its in the apartment so I cant use any smelling coolant agent, just clean new cool water from the tap)
USB connection
Max 8A@230V (have a10A fuse)
Quiet
Lift able <50 kg.

Is this to much to ask for?

http://www.maxnc.com/maxpath_42.htm can thisone do it? (the mini)
They have some nice mills aswell but the travel length is to short.

11-22-2009, 03:33 AM	#51
mwolfman Cooling Savant Join Date: Jun 2004 Location: Sweden Posts: 152	Re: Proud owner of new EMCO mill, need some US help Dont know if anybody around here are alive but it's worth a shoot. I want a CNC-mill that is able to handle steel parts up to 400600150mm (so that it can be used for my bike/car). I dont care about time, I can leave it on during weekdays while I at work and then pause it when coming home. If I could use a good software then I could let it manufacture parts for me while I'm on business trips, but then I need an magazine for drill bits and parts. So requirements: An fairly large surface area. 3-axis CNC (preferably with a spinning table as an option) Small (has to fit my kitchen bench) Water cooling (its in the apartment so I cant use any smelling coolant agent, just clean new cool water from the tap) USB connection Max 8A@230V (have a10A fuse) Quiet Lift able <50 kg. Is this to much to ask for? http://www.maxnc.com/maxpath_42.htm can thisone do it? (the mini) They have some nice mills aswell but the travel length is to short. __________________ Very old specs below, but I keep it for sentimental values :-/ Gigabyte GA-7N400 Pro2, Barton 2500@3200 -11201MHz, X800 XL , 1 GB Cosair 3200 (6-2-2-2) @400MHz in dual channel TurboBlock Rev. 1.0~0,15452756±0,004125251°C/W , HL120.3* with 3 Papst 4412@7volt , Hydor L30II Last edited by mwolfman; 11-22-2009 at 04:42 AM. Reason: adding links to posible machines