Quote:
Originally Posted by blue68f100
Becareful removing a HD. If you remove a good one with one already failed your raid/data is lost.
|
None of the drives is actually showing the amber failure light. Unfortunately I'm unable to get it to the point where I can check the logs, although before I tried the Repair all Errors the log was just showing a problem with an inode.
I was just wondering if the panic I get when the Disk 1 LED goes solid might be indicating bad sectors on Drive 1. If that's the case, then it might come up in degraded mode if I pull the drive. But that's a longshot and will be the last thing I try. First I need to pry the drives from the unit and have SpinRite check them over.