Pro/Forums - View Single Post

tman · 03-23-2010, 02:16 PM

The disks are 60 GB. I've run a disk check before, and it took a long time, and the percentage complete was never very accurate.

I'm seeing similar things in the log, but I see the following in the log repeated over and over:
03/23/2010 14:57:06 104 E D[80070000] | Disk Driver : Cannot Read Device 80070000 Block 48448384
03/23/2010 14:57:06 104 E L01 | File System Check : Cannot Read: Blk 48448384
03/23/2010 14:57:17 104 D SYS | DISK: req=0x3F741C dev=0xC0000 fn=1 blk=0x2F18E30 sts=20
03/23/2010 14:57:22 104 D SYS | DISK: req=0x3F741C dev=0xC0000 fn=1 blk=0x2F18E30 sts=20
03/23/2010 14:57:22 104 D SYS | DISK: req=0x3F741C dev=0x80000 fn=1 blk=0x2F18E30 sts=20

The front LEDs all show green when lit. I see the Disk 1 LED flash green every once in a while when I do look at it.

One thing that might be affecting this is when I ran the disk check, I didn't choose the destructive option. I ran one of the other disk checks that don't attempt to repair all errors. It seems that it keeps on getting to this bad block and instead of fixing it or marking it as bad and moving on, it just keeps trying over and over from what I can tell.

03-23-2010, 02:16 PM	#3
tman Cooling Neophyte Join Date: Mar 2010 Location: NJ Posts: 4	Re: Disk Check stuck at 5% The disks are 60 GB. I've run a disk check before, and it took a long time, and the percentage complete was never very accurate. I'm seeing similar things in the log, but I see the following in the log repeated over and over: 03/23/2010 14:57:06 104 E D[80070000] \| Disk Driver : Cannot Read Device 80070000 Block 48448384 03/23/2010 14:57:06 104 E L01 \| File System Check : Cannot Read: Blk 48448384 03/23/2010 14:57:17 104 D SYS \| DISK: req=0x3F741C dev=0xC0000 fn=1 blk=0x2F18E30 sts=20 03/23/2010 14:57:22 104 D SYS \| DISK: req=0x3F741C dev=0xC0000 fn=1 blk=0x2F18E30 sts=20 03/23/2010 14:57:22 104 D SYS \| DISK: req=0x3F741C dev=0x80000 fn=1 blk=0x2F18E30 sts=20 The front LEDs all show green when lit. I see the Disk 1 LED flash green every once in a while when I do look at it. One thing that might be affecting this is when I ran the disk check, I didn't choose the destructive option. I ran one of the other disk checks that don't attempt to repair all errors. It seems that it keeps on getting to this bad block and instead of fixing it or marking it as bad and moving on, it just keeps trying over and over from what I can tell.