Pro/Forums - View Single Post

kazer · 03-26-2010, 03:05 PM

I have an M4000 unit that will no longer power on, and unfortunately has all the photos of my baby on it among other things I'd not like to lose.

At first I thought it was the power supply, but I'm not sure anymore. I have voltage coming from the main part of the power supply going into the smaller power junction board I'm going to call it. 5v on the red wires and 8v on the yellow (is that right? i was thinking it would be 12v).

I've tried using an ATX power supply to provide 5v on red and 12v on yellow to that junction board, but I still get nothing when i try and turn it on.

The issue occured after trying to turn the unit back on after my power was out for a day. Any help would be great.

03-26-2010, 03:05 PM	#1
kazer Cooling Neophyte Join Date: Jul 2008 Location: SC Posts: 2	M4000 Dead I have an M4000 unit that will no longer power on, and unfortunately has all the photos of my baby on it among other things I'd not like to lose. At first I thought it was the power supply, but I'm not sure anymore. I have voltage coming from the main part of the power supply going into the smaller power junction board I'm going to call it. 5v on the red wires and 8v on the yellow (is that right? i was thinking it would be 12v). I've tried using an ATX power supply to provide 5v on red and 12v on yellow to that junction board, but I still get nothing when i try and turn it on. The issue occured after trying to turn the unit back on after my power was out for a day. Any help would be great.