Thread: Snap 1000 Error
View Single Post
Unread 06-07-2010, 09:02 PM   #9
microsvc
Cooling Neophyte
 
microsvc's Avatar
 
Join Date: Jun 2010
Location: Oklahoma
Posts: 15
Default Re: Snap 1000 Error

type:
config device fix disable
I get
"Partial command entered, one of:
config devices automount enable|disable (Auto-Mounting of devices at boot)
config (individual/mirror/span/raid/xtra (=spare)) [dev,...]
format dev [label ["comment"]] [/reinit [/nocore]] (format an unmounted device)
fsck dev [[/fix /fixfatal /altsb]] (check device's filesystem)
small SizeInMB dev0 ... devN
info (same as "info devices")
mount [dev] request to mount one or all devices
predict (individual/mirror/span/raid) [dev,...]
resync dev
testparity dev
unmount [force/dev] request to unmount one or all devices
Command returned with console error -2."


then type:
config device force disable
I get
"config device force disable
Partial command entered, one of:
config devices automount enable|disable (Auto-Mounting of devices at boot)
config (individual/mirror/span/raid/xtra (=spare)) [dev,...]
format dev [label ["comment"]] [/reinit [/nocore]] (format an unmounted device)
fsck dev [[/fix /fixfatal /altsb]] (check device's filesystem)
small SizeInMB dev0 ... devN
info (same as "info devices")
mount [dev] request to mount one or all devices
predict (individual/mirror/span/raid) [dev,...]
resync dev
testparity dev
unmount [force/dev] request to unmount one or all devices

Command returned with console error -2."


then type:
reboot

After rebooting and if all goes well and it's still not mounting then issue the command at the debug line
type:
config device mount
I get "Unable to rescan all devices because dduQuietAllDevices() was not previously called
------------
Command returned with console error 1."


(You may have to reboot if you do not see your folders.)

Sorry, this didn't work
microsvc is offline   Reply With Quote